| Peer-Reviewed

The SPQR («Semper Paratus ad Qualitatem et Rationem») Principle in Action

Received: 25 May 2017     Accepted: 6 June 2017     Published: 13 July 2017
Views:       Downloads:
Abstract

We show an application of the SPQR Principle [«Semper Paratus ad Qualitatem et Rationem (“Always Ready for Quality and Rationality”)»] as the way to analyse papers and books; it seems that very few people have taken care of Quality of Methods (Deming, Juran, Gell-Mann, Shewhart, Einstein, Galilei). The case analysed here is about a Design of Experiment application to Large-Scale Metrology and to Control Charts.

Published in Engineering and Applied Sciences (Volume 2, Issue 3)
DOI 10.11648/j.eas.20170203.11
Page(s) 27-52
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2017. Published by Science Publishing Group

Keywords

Methods Quality, Large-Scale Metrology, Peer Review, Open Access, Rational Manager

References
[1] scienceblogs.com/.../2012/.../nice-try-science-publishing-group
[2] www.sabhlokcity.com/.../more-on-the-science-publishing-group...
[3] Deming W. E., 1986, Out of the Crisis, Cambridge University Press.
[4] Deming W. E., 1997, The new economics for industry, government, education, Cambridge University Press.
[5] Juran, J., 1988, Quality Control Handbook, 4th ed, McGraw-Hill, New York.
[6] M. Gell-Mann., 1994, The Quark and the Jaguar: Adventures in the Simple and the Complex, W. Freeman and Company, N. Y.
[7] Shewhart W. A., 1931, Economic Control of Quality of Manufactured Products, D. Van Nostrand Company.
[8] Shewhart W. A., 1936, Statistical Method from the Viewpoint of Quality Control, Graduate School, Washington.
[9] Montgomery D. C., 1996, Introduction to Statistical Quality Control, Wiley & Sons (wrong definition of the term "Quality", and many other drawbacks in wrong applications).
[10] Montgomery D. C., 2009, 6th edition, Introduction to Statistical Quality Control, Wiley & Sons (wrong).
[11] Montgomery D. C., 2011, 5th edition, Applied Statistics And Probability For Engineers, Wiley & Sons.
[12] Montgomery D. C., 2013, 8th edition, Design and Analysis of Experiments, Wiley & Sons.
[13] Montgomery D. C., editions after 2009 are worse, Introduction to Statistical Quality Control, Wiley & Sons (wrong definition of the term "Quality", and many other drawbacks in wrong applications).
[14] Cascini E., Sei Sigma per docenti in 14 capitoli, RCE Multimedia 2009.
[15] Arcidiacono G., et al. Governare i processi per governare l'impresa - Lean Six Sigma, Springer 2014.
[16] Citti P., La metodologia sei sigma nei servizi, Firenze University Press 2006.
[17] Pyzdek T., The Six Sigma Handbook A Complete Guide For Green Belts, Black Belts, And Managers At All Levels, McGraw-Hill 2003.
[18] Munro R., et al., The Certified Six Sigma Green Belt Handbook, American Society for Quality 2015.
[19] Pande P., et al., The Six Sigma Way_How GE, Motorola, and Other Top Companies are Honing their performance, McGraw-Hill.
[20] Brue G., Six Sigma for Managers, McGraw-Hill 2005.
[21] Eckes G., Six Sigma for Everyone- (2003) Managers, Wiley 2003.
[22] Craig G. et al., Six Sigma for Dummies, Wiley 2012.
[23] Allen T., Introduction to Engineering Statistics and Six Sigma, Springer 2006.
[24] PARK S. (1996), Robust Design and Analysis for Quality Engineering, Chapman & Hall, London.
[25] F. Kutsanedzie, S. Achio, E. Ameko, Basic concepts and applications of experimental design, Science Publishing Group 2015, ISBN: 978-1-940366-500.
[26] Taguchi G., "Product quality evaluation and tolerancing", 30th EOQC Conference, Stockholm 1986.
[27] Taguchi G., System of Experimental Design, vol. 1, ASI (American Supplier Institute) and Unipub Kraus International Publications.
[28] Taguchi G., System of Experimental Design, vol. 2, ASI and Unipub Kraus International Publications.
[29] Taguchi G., Introduction to quality engineering, Asian Productivity Organization, 1988.
[30] Taguchi G., Yu-In Wu, Introduction to off-line quality control, Central Japan Quality Control Association, 1979.
[31] Taguchi S., Byrne D., 1986 The Taguchi Approach to Parameter Design, Best Technical Paper (!?), American Society for Quality Control.
[32] F. Franceschini, M. Galetto, D. Maisano, L. Mastrogiacomo, B. Pralio, Distributed Large-Scale Dimensional Metrology, New Insights, Springer-Verlag London Limited 2011.
[33] Franceschini F, Maisano D, Mastrogiacomo L, Pralio B (2010) Ultrasound transducers for largescale metrology: a performance analysis for their use by the MScMS. IEEE Trans Instrum Meas 59 (1): 110–121.
[34] F. Galetto, Nuovi sviluppi nel calcolo dei parametri affidabilistici dei sistemi, LXXIII Riunione annuale AEI, Torino, 1972.
[35] F. Galetto, Numero dei guasti di un sistema e determinazione di un modello reale atto a rappresentarlo, VIII congr. AICQ, Napoli, 1973.
[36] F. Galetto, Integrazione Numerica di Equazioni Integrali di Volterra, Facoltà di Matematica, Bologna, 1973.
[37] F. Galetto, Pitfalls of Bayes Methods, Internat. conf. on Reliability/ Diagnostics, Torino, 1986.
[38] F. Galetto, CLARA (Cost and Life Appraisal via Reliability Analysis), 30th EOQC Conference, Stoccolma, 1986.
[39] F. Galetto, SARA (System Availability and Reliability Analysis), Annual Reliability Symposium, Philadelphia, 1977.
[40] F. Galetto, CLAUDIA (Cost and Life Analysis via Up and Down time Integral Approach), XXI EOQC Conf., Varna, 1977.
[41] GALETTO F. (1978), An application of experimental design in the Automotive field, SIA Congress.
[42] F. Galetto, NORA (a New Outlook on Reliability of Automobiles), XXIII EOQC Conf., Budapest, 1979.
[43] F. Galetto, New results in reliability analysis, 2nd Int. Conf. on Reliability/ Maintainab., Perros- Guirec, 1980.
[44] GALETTO F. (1984) Assessment of Product Reliability, World Quality Congress '84, Brighton.
[45] GALETTO F. (1986) Quality/Reliability: How to get results, EOQC (Automotive Section), Madrid.
[46] F. Galetto, Are Bayes Methods really better ?, IASTED Int. Conf. on Quality/ Reliability, Paris, 1987.
[47] GALETTO F. (1987) Quality and Reliability, the Iveco way, Mgt Dev. Review by MCE, Brussels.
[48] GALETTO F. (1988) Quality and reliability. A must for industry, ISATA, Montecarlo.
[49] F. Galetto, Comment on: 'New Practical Bayes Estimators for the 2-parameters Weibull distribution, IEEE Transactions on Reliability vol. 37, 1988.
[50] GALETTO F. (1989) Quality of methods for quality is important, EOQC Conference, Vienna.
[51] GALETTO F. (1990) Basic and managerial concerns on Taguchi Methods, ISATA, Florence.
[52] F. Galetto, Qualità. Alcuni metodi statistici da Manager, CUSL, 1995.
[53] F. Galetto, Quality: Management Commitment is not enough, ISATA, Vienna, 1990.
[54] GALETTO F., LEVI R. (1993) Planned Experiments: key factors for product Quality, 3rd AMST 93, Udine.
[55] GALETTO F. (1993) DOE. Importanti idee sulla Qualità per i manager, DEINDE, Torino.
[56] GALETTO F. (1993) Which kind of Quality? Of products, of processes, of Management? 1st AITEM, Ancona.
[57] Galetto, F., Managerial Issues for Design of Experiments, 4th AMST 96, Udine, 1996.
[58] Galetto, F., We need Quality of Managers, Quality 97, 6th Intern. Conf., Ostrava, Czeh Republic, 1997.
[59] Galetto, F., Quality Education on Quality for Future Managers, 1st Conference on TQM for HEI (Higher Education Institutions), Tolone, 1998.
[60] Galetto, F., GIQA the Golden Integral Quality Approach: from Management of Quality to Quality of Management, Total Quality Management (TQM), Vol. 10, No. 1, 1999.
[61] Galetto, F., Quality Education and Total Quality Management, 2nd Conf. on TQM for HEI, Verona, 1999.
[62] Galetto, F., Quality Methods for Design of Experiments, 5th AMST 99, Udine, 1999.
[63] Galetto, F., Quality Function Deployment, Some Managerial Concerns, AITEM99, Brescia, 1999.
[64] GALETTO F., GENTILI E. (1999), The need of Quality Methods used for Quality CAPE '99, Durham, UK.
[65] GALETTO F., GENTILI E. (1999), Quality of the Quality Methods, AITEM 99 Conference, Brescia.
[66] GALETTO F., GENTILI E. (2000), In search of Quality in QFD and Taguchi methods, CAPE.
[67] GALETTO F. (2000) Qualità. Alcuni metodi statistici da Manager, CLUT, Torino.
[68] Galetto, F., Quality Education for Professors teaching Quality to Future Managers, 3rd Conf. on TQM for HEI, Derby, UK, 2000.
[69] Galetto, F., Statistical Thinking, Customer Satisfaction, Qualità del Servizio e Formazione Universitaria, Conv. SIS, Firenze, 2000.
[70] Galetto, F., Quality, Bayes Methods and Control Charts, 2nd ICME 2000 Conference, Capri, 2000.
[71] Galetto, F., Reliability Integral Theory applied to "two machines lines" with failures, 2nd ICME 2000 Conference, Capri, 2000.
[72] Galetto, F., RELIABILITY PREDICTION DURING DEVELOPMENT, ATA conf., Firenze, 2000.
[73] Galetto, F., Looking for Quality in "quality books", 4th Conf. on TQM for HEI, Mons, Belgium, 2001.
[74] Galetto, F., Quality and Control Carts: Managerial assessment during Product Development and Production Process, AT&T (Society of Automotive Engineers), Barcelona, 2001.
[75] Galetto, F., Quality QFD and control charts: a managerial assessment during the product development process, Congresso ATA, Firenze, 2001.
[76] Galetto, F., Business excellence Quality and Control Charts, 7th TQM Conf., Verona, 2002.
[77] Galetto, F., Fuzzy Logic and Control Charts, 3rd ICME 2002 Conference, Ischia, 2002.
[78] Galetto, F., Quality education on Quality for future managers, 5th World Congr. on Engineering Education of NOT, Varsavia, 2002.
[79] Galetto, F., Analysis of "new" control charts for Quality assessment, 5th Conf. on TQM for HEI, Lisbon, Portugal, 2002.
[80] Galetto, F., Quality decisions and ISO 9000:2000 Principles, 6th AMST 99, Udine, 2002.
[81] Galetto, F., Quality and “quality magazines”, 6th Conf. on TQM for HEI, Oviedo, Spain, 2003.
[82] Galetto F., G. Pistone, M. P. Rogantin, Confounding revisited with commutative computational algebra, Journal of statistical planning and inference,, 2003.
[83] Galetto, F., "Six Sigma Approach" and Testing, ICEM12 –12th Intern. Conf. on Experimental Mechanics, Bari Politecnico, 2004.
[84] Galetto, F., Reliability analysis in product development, AMST 2005, Udine, 2005.
[85] Galetto, F., Statistics for Quality and “quality magazines”, 5th ENBIS, Newcastle, 2005.
[86] Galetto, F., Service Quality: Fuzzy Logic and Yager Method; a scientific analysis, IFIP TC 7, Politecnico di Torino, 2005.
[87] Galetto, F., Quality and “Statistics Packages”, 8th Conf. on TQM for HEI, Palermo, 2005.
[88] Galetto, F., Quality Education and “quality papers”, IPSI 2006, Marbella, 2006.
[89] Galetto, F., Fuzzy Logic and Quality Control: a scientific analysis, IPSI 2006, Amalfi, 2006.
[90] Galetto, F., Quality Education versus "Peer Review", IPSI 2006, Montenegro, 2006.
[91] Galetto, F., Does "Peer Review" assure Quality of papers and Education?, 8th Conf. on TQM for HEI, Paisley, Scotland, 2006.
[92] Galetto, F., Quality Education versus "Peer Review", IPSI 2006, Montenegro, 2006.
[93] Galetto, F., A must: Quality of teaching, IPSI 2006, Portofino, 2006.
[94] Galetto, F., The Pentalogy, VIPSI, Belgrado, 2009.
[95] Galetto, F., The Pentalogy Beyond, 9th Conf. on TQM for HEI, Verona, 2010.
[96] Galetto, F., Six Sigma: help or hoax for Quality?, 11th Conf. on TQM for HEI, Israel, 2012.
[97] Galetto, F., Bibliometrics: Help or Hoax for Quality?, UJER 2 (4), DOI: 10.13189/ujer.2014.020404, 2014.
[98] Galetto, F., Riemann Hypothesis Proved, Academia Arena 6 (12): 19-22, ISSN 1553-992X, 2014.
[99] Galetto, F., Hope for the Future: Overcoming the DEEP Ignorance on the CI (Confidence Intervals) and on the DOE (Design of Experiments, Science J. Applied Mathematics and Statistics. Vol. 3, No. 3, pp. 70-95, doi: 10.11648/j.sjams.20150303.12, 2015.
[100] Galetto, F., Management Versus Science: Peer-Reviewers do not Know the Subject They Have to Analyse, Journal of Investment and Management. Vol. 4, No. 6, pp. 319-329, doi: 10.11648/j.jim.20150406.15, 2015.
[101] Galetto, F., The first step to Science Innovation: Down to the Basics., Journal of Investment and Management. Vol. 4, No. 6, pp. 319-329, doi: 10.11648/j.jim.20150406.15, 2015.
[102] Galetto, F., AFFIDABILITÀ vol. 1 Teoria e Metodi di calcolo, CLEUP editore, Padova, 81, 84, 87, 94.
[103] Galetto, F., AFFIDABILITÀ vol. 2 Prove di affidabilità: distribuzione incognita, distribuzione esponenziale, CLEUP editore, Padova, 82, 85, 94.
[104] Galetto, F., Qualità. Alcuni metodi statistici da Manager, CUSL, 1995/7/9.
[105] Galetto, F., Gestione Manageriale della Affidabilità. CLUT, Torino.
[106] Galetto, F., Manutenzione e Affidabilità. CLUT, Torino.
[107] Galetto, F., 2016, Reliability and Maintenance, Scientific Methods, Practical Approach, Vol-1, www.morebooks.de.
[108] Galetto, F., 2016, Reliability and Maintenance, Scientific Methods, Practical Approach, Vol-2, www.morebooks.de.
[109] Galetto, F., 2016, Design Of Experiments and Decisions, Scientific Methods, Practscal Approach, www.morebooks.de.
[110] Galetto, F., 2017, The Six Sigma HOAX versus the versus the Golden Integral Quality Approach LEGACY, www.morebooks.de.
[111] Galetto, F., 2017, Six Sigma Hoax: The Way Professionals Deceive Science. Nuclear Science. Vol. 2, No. 3, 2017, pp. 59-81. doi: 10.11648/j.ns.20170203.11
[112] Galetto, F., Papers and Documents in the Academia.edu, 2015-2017.
[113] Galetto, F., Several Papers and Documents in the Research Gate Database, 2014.
[114] S El-Ferik and M Ben-Daya, 2008, Model for imperfect age-based preventive maintenance with age reduction, Journal of the Operational Research Society (2008) 59, 1644 –1651.
[115] Galetto, F., 2017, Imperfect-age-maintenance_WRONG paper found in Academia.edu, Published in the Academia.edu.
Cite This Article
  • APA Style

    Fausto Galetto. (2017). The SPQR («Semper Paratus ad Qualitatem et Rationem») Principle in Action. Engineering and Applied Sciences, 2(3), 27-52. https://doi.org/10.11648/j.eas.20170203.11

    Copy | Download

    ACS Style

    Fausto Galetto. The SPQR («Semper Paratus ad Qualitatem et Rationem») Principle in Action. Eng. Appl. Sci. 2017, 2(3), 27-52. doi: 10.11648/j.eas.20170203.11

    Copy | Download

    AMA Style

    Fausto Galetto. The SPQR («Semper Paratus ad Qualitatem et Rationem») Principle in Action. Eng Appl Sci. 2017;2(3):27-52. doi: 10.11648/j.eas.20170203.11

    Copy | Download

  • @article{10.11648/j.eas.20170203.11,
      author = {Fausto Galetto},
      title = {The SPQR («Semper Paratus ad Qualitatem et Rationem») Principle in Action},
      journal = {Engineering and Applied Sciences},
      volume = {2},
      number = {3},
      pages = {27-52},
      doi = {10.11648/j.eas.20170203.11},
      url = {https://doi.org/10.11648/j.eas.20170203.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.eas.20170203.11},
      abstract = {We show an application of the SPQR Principle [«Semper Paratus ad Qualitatem et Rationem (“Always Ready for Quality and Rationality”)»] as the way to analyse papers and books; it seems that very few people have taken care of Quality of Methods (Deming, Juran, Gell-Mann, Shewhart, Einstein, Galilei). The case analysed here is about a Design of Experiment application to Large-Scale Metrology and to Control Charts.},
     year = {2017}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - The SPQR («Semper Paratus ad Qualitatem et Rationem») Principle in Action
    AU  - Fausto Galetto
    Y1  - 2017/07/13
    PY  - 2017
    N1  - https://doi.org/10.11648/j.eas.20170203.11
    DO  - 10.11648/j.eas.20170203.11
    T2  - Engineering and Applied Sciences
    JF  - Engineering and Applied Sciences
    JO  - Engineering and Applied Sciences
    SP  - 27
    EP  - 52
    PB  - Science Publishing Group
    SN  - 2575-1468
    UR  - https://doi.org/10.11648/j.eas.20170203.11
    AB  - We show an application of the SPQR Principle [«Semper Paratus ad Qualitatem et Rationem (“Always Ready for Quality and Rationality”)»] as the way to analyse papers and books; it seems that very few people have taken care of Quality of Methods (Deming, Juran, Gell-Mann, Shewhart, Einstein, Galilei). The case analysed here is about a Design of Experiment application to Large-Scale Metrology and to Control Charts.
    VL  - 2
    IS  - 3
    ER  - 

    Copy | Download

Author Information
  • Independent Scholar, Buccinasco (Milan), Italy

  • Sections